Quick, clever folding

No terminal is needed to operate the two VOLTO large-scale tedders. A single-acting tractor spool valve controls the lift ram, a double-acting one controls folding and unfolding of the rotor frame. No awkward cables or stabiliser rods are required, nor is it necessary to switch the hydraulics. The VOLTO 1300 T/TS and VOLTO 1500 T/TS fold to a width of under 3.00 metres – in transport position the rotors lie on the chassis frame with an overall height of just 3.29 metres and a very low centre of gravity. Supported by the wide track and the large chassis wheels, this ensures safe, fast manoeuvring on roads and lanes.

Key features of the VOLTO 1300 T/TS and 1500 T/TS at a glance:

Four new models with 13 and 15.10 m working width.
Innovative chassis frame with Y-shaped axle beam: slender design, centre of gravity close to the rotor frame on the chassis and maximum ground clearance when rotors are raised.
TS versions with self-steering chassis in working position: no distortion between chassis and rotor frames, no damage to the sward caused by rotor wheels. Automatically steers straight ahead when rotor frames are raised.
Large chassis wheels up to 500/55-20 and 1,055 mm diameter with dual function as guide wheels: soil-friendly in the field, safe on the road.
12 (VOLTO 1300 T/TS) or 14 (VOLTO 1500 T/TS) rotors with 1.50 m diameter and six tine arms per rotor.
Rotor frame with double-hinged arms for perfect ground-contour following even on uneven ground.
MAX SPREAD crop flow with spreader arms angled back for a clean rake and optimal spread pattern.
Strong, equal-angled tines with five windings and reliable tine loss protection.
Raking height set centrally via crank handle, toolless adjustment of spreading angle (12/16 degrees).
Completely redesigned PERMALINK drive: more power for less torque, reinforced finger clutches with larger bearings and new, encapsulated rotor drives with oil filling.
Compact transport position: 3.29 m transport height, <3.00 m transport width and short transport length for optimal view and manoeuvrability.
Very simple operation and folding mechanism: requires only one single-acting hydraulic spool valve (rotor lift) and one double-acting hydraulic spool valve (switch between transport and working position); plus 1x single-acting for optional edge-tedding crop guard.

New VOLTO tedder with 13.0 and 15.10 m working width and innovative chassis design