One machine, numerous options, full connectivity

With the TRION 740, purchasers can also choose from an extensive range of equipment options, including TERRA TRAC crawler tracks, MONTANA specification with slope-compensation chassis, CERIO auger cutterbars up to 9.30 m wide as well as VARIO auger cutterbars, CONVIO and CONVIO FLEX Draper cutterbars with a working width of up to 12.30 m, new ROVIO maize pickers with 6 to 12 rows, CEMOS operator assistance systems in various configuration levels, different grain tanks sizes, grain tank unloading augers and straw and chaff spreading systems. The GPS PILOT CEMIS 1200 is available for automatic steering, which, with corresponding activations, also enables task management with yield mapping for precision farming. Furthermore, all TRION 740, TRION 740 TERRA TRAC and TRION 740 MONTANA will be set up in the new CLAAS connect on hand-over to the customer, giving farmers and contractors direct access to all relevant machine data – as well as to documentation and mapping of yield data when yield recording is optionally selected. “All new TRION and LEXION combine harvesters are supplied with free machine connectivity for five years as standard, providing farmers and contractors with new opportunities for machine management and saving them a great deal of valuable time”, explains Philipp Stiens. “The system automatically records all field-specific combine harvester data from individual machines or an entire fleet and combines them in the new CLAAS connect. The data can be viewed at any time on the PC or on mobile devices on this platform and used to analyse various performance indicators or perform a full evaluation, as well as for subsequent invoicing. It is also possible to convert yield data to high-quality yield maps.”

CLAAS connect offers many other practical functions as standard, including access to digital operating instructions, the Lubricant Advisor and the option to order wear and spare parts from the online shop – the stored machine number ensures that parts are matched to the machine specification.

Features of TRION 740 / TRION 740 TERRA TRAC / TRION 740 MONTANA at a glance:

High-performance alternative in the mid-range hybrid class for challenging harvesting conditions in damp, long and tough straw: APS HYBRID and ROTO PLUS single rotor now paired with a powerful 435 hp engine.
Available either as a wheeled machine, TERRA TRAC or MONTANA
External width 3.49 m with 800/70 R38 Triebachs tyres (3.29 m with 680/80 R38) or 735 mm TERRA TRAC .
Cummins six-cylinder engine with 8.9 l cubic capacity, 435 hp at 1,900 rpm and DYNAMIC POWER intelligent power management for up to 10 per cent additional fuel saving; approved for operation with hydrotreated vegetable oils (HVO) either in pure form or blended with conventional diesel fuel.
APS HYBRID threshing unit with 1,420 mm drum width, 450 mm pre-accelerator, 600 mm threshing drum and MULTICROP design.
ROTO PLUS single rotor with 570 mm diameter, 4,200 mm length and up to 4 optional rotor flaps hydraulically adjustable from the cab. Optional 4D rotor folding control for hilly operating conditions.
Independent adjustment of threshing unit and rotor speed for optimum adaptation to a wide variety of crops and harvesting conditions: clean threshing performance with low losses, lowest possible cleaning effort and minimal proportion of broken grains.
Productivity- and efficiency-boosting CEMOS AUTOMATIC operator assistance which can be configured on several different levels to suit customer requirements:
- CRUISE PILOT automatically controls speed on the basis of engine load with three drive modes targeting efficiency and productivity.
- AUTO CROP FLOW detects and avoids load peaks.
- AUTO SLOPE automatically adjusts the fan speed to the slope.
- CEMOS DIALOG calibrates loss sensors: CEMOS identifies the cause of recorded losses and then automatically adjusts the sensitivity of the loss sensors for residual grain separation and cleaning. This results in the best possible machine setup and maximum throughput with minimal losses.
- CEMOS AUTO THRESHING, CEMOS AUTO SEPARATION and CEMOS AUTO CLEANING for automatic self-optimisation of threshing unit, secondary separation and cleaning.
- CEMOS AUTO HEADER with FIELD SCANNER available for VARIO cutterbars: fully automatic adjustment of reel speed, horizontal reel position and table length to harvesting conditions.
11,000 or 12,000 l grain tank volumes; grain tank unloading tube in different lengths for full discharge of cutterbar widths up to 12 m and with 110 or 130 l/s discharge rate.
Optional extra wear-resistant PREMIUM LINE components for particularly heavy use or abrasive crops.
Spacious comfort cab with CEBIS and CMOTION, optional swivelling driver’s seat (15 degree angle of rotation on either side) and dynamic steering (40 per cent fewer turns of the steering wheel up to max. 10 km/h).
Feeder housing with multicoupler, hydraulic header reversing and ‘slow intake’ function.
CERIO auger cutterbars and MAX FLEX cutterbars available with working widths up to 9.3 m, VARIO cutterbars (with optional CEMOS AUTO HEADER), CONVIO and CONVIO FLEX belt cutterbars up to 12.30 m working width.
GPS PILOT CEMIS 1200 for automatic steering; optional CEMIS 1200 for yield mapping and CLAAS connect interface for fleet management and yield mapping.
Each machine is stored with its machine number in CLAAS connect, and comes with free connectivity for five years.

TRION 740: Compact hybrid combine harvester with 435 hp and a single ROTO PLUS rotor